How it works
Anchoring a Water Tank: Stopping Empty Tanks from Blowing Over
By the WaterQuotes team · Published 2026-11-16 · 6 min read
An empty 5,000-litre slimline tank weighs roughly 100–150 kg — substantial on the ground, but nothing compared to the sail-like surface area it presents to a summer highveld storm. Wind gets underneath and behind it, the tank lifts, and the damage that follows ranges from a cracked tank to a collapsed fence to a genuinely dangerous projectile. Anchoring a water tank is not an optional finishing touch; it is a core part of a safe installation, and it should be part of every quote you receive.
This article explains why tanks are vulnerable, what anchoring methods installers use, and what questions to ask before anyone pours a base or tightens a strap.
Why empty tanks are the real risk
A full tank is heavy enough to stay put under most conditions. The problem arrives in stages: you have just had a tankful delivered, your municipal supply comes back on, and you drain the tank down to zero while waiting for the next fill or the next outage. That window — empty or quarter-full — is when the physics turn against you.
Plastic tanks are designed to hold water, not to resist lateral wind load on their own. Slimline tanks are especially exposed because their tall, flat profile is almost purpose-built to catch wind. Round tanks are somewhat better in this respect, but no freestanding tank should be considered self-anchoring when empty. If you are still weighing up which shape suits your property, the comparison in slimline vs round water tanks covers the trade-offs in detail, including how profile affects siting and stability.
What anchoring actually involves
There is no single universal method. Installers choose an approach based on tank size and shape, the substrate (paving, soil, concrete, deck), proximity to walls or fences, and local wind exposure. The most common methods are:
Concrete plinth with anchor bolts. The tank sits on a cast or pre-cast concrete base with threaded anchor bolts cast in or drilled in after curing. Strapping loops over the tank and down to the bolts. This is the most permanent option and the most common for larger round tanks.
Wall-mounted brackets. Slimline tanks installed against a wall can be held with galvanised steel brackets bolted into masonry. The bracket bears horizontal load; the tank’s own weight keeps it down. This works well where a plinth would obstruct a path or drain.
Freestanding stand with integrated restraint. Many proprietary steel tank stands are designed to restrain as well as elevate the tank, with strapping points built into the frame. If you are considering a raised installation — for gravity-fed pressure — the costs and construction of stands are covered separately in water tank stand costs.
Ground anchors and strapping. On sites where concrete is impractical, helical ground anchors driven into stable soil can provide anchor points. Strapping runs from the anchor points up and over the tank. This is less common for permanent domestic installations but sometimes used on agricultural or remote sites.
In all cases, the strapping material matters. Galvanised steel banding with ratchet tensioners is standard for tanks above roughly 2,500 litres. UV-resistant polypropylene strapping is used on smaller tanks. Neither should be in direct contact with the tank wall without a rubber or plastic sleeve underneath — bare metal strapping can abrade and eventually cut into the tank under vibration.
What a good installation checklist looks like
Before any installer starts, they should be assessing the following:
| Factor | What to check |
|---|---|
| Ground bearing capacity | Soft or fill soil needs a wider plinth or deeper anchors |
| Distance from property boundaries | Affects what happens if the tank does shift |
| Wall or structure to tie to | Determines whether bracket or strap method is appropriate |
| Tank fill/drain cycle | Frequent cycling increases fatigue on straps; specify heavy-duty fittings |
| Local wind exposure | Corner sites, elevated ground, or open gardens need more robust anchoring |
If an installer shows up, marks where the tank goes, and starts without discussing anchoring, that is a red flag. Anchoring is part of the scope, not an add-on.
If you want to compare how different installers approach anchoring and site prep, it is worth getting more than one opinion. Compare 3 free quotes — vetted installers, no obligation.
Standards and compliance
Tank manufacturers publish installation guidelines that specify minimum anchoring requirements for each tank size. These are based on the tank’s empty weight, capacity, and wall thickness. SABS (the South African Bureau of Standards) sets the broader product and installation framework; for water quality once water is stored, SANS 241 (2024 edition) is the applicable drinking-water standard.
In practice, domestic installers are not always required to submit anchoring plans to local authorities, but that does not mean anything goes. If your tank is on a boundary wall, elevated on a stand, or close to a public footpath, your municipality may require approval. Ask your installer before work starts — the responsibility for checking this sits with the homeowner as much as the contractor.
What your existing backup system setup means for anchoring
Anchoring decisions do not happen in isolation. Where the tank sits relative to your pump, your rainwater harvesting inlet, your municipal top-up valve, and your overflow outlet all affect what anchoring method is practical. A tank tucked into a corner with pipework on three sides may limit your bracket options. A tank on an exposed south-west-facing wall needs more robust restraint than one sheltered by a building.
This is one reason it is worth reading up on how complete backup water systems are designed, not just the tank in isolation. The anchoring method should be chosen at the same time as the tank position, not retrofitted afterwards.
If your current tank is unanchored or you are planning a new installation, getting a proper site assessment costs nothing at the quote stage. Get your free installer quotes — no commitment required.
Retrofitting anchors to an existing tank
If you already have a tank that is sitting unrestrained — perhaps installed by a previous owner or by a contractor who cut corners — it can usually be anchored retrospectively. The options depend on what is already in place:
- If there is a concrete base, an installer can drill anchor points and add strapping without disturbing the tank.
- If the tank sits on pavers, the pavers may need to be lifted to pour a small pad with anchor bolts, or ground anchors can be driven adjacent to the base.
- If the tank is against a brick wall, wall brackets can be added without moving the tank at all.
The cost of retrofitting anchors is typically modest compared to replacing a tank — or repairing whatever the tank hits when it goes over. Get a quote that itemises this specifically so you know exactly what you are paying for.
The honest summary
Anchoring a water tank is straightforward engineering, not a complicated speciality. What makes it go wrong is treating it as an afterthought — skipping the site assessment, using undersized strapping, or assuming a full tank will always stay full. It will not. Plan for the empty state, anchor accordingly, and choose an installer who raises this without being prompted.
Quick answers
Does a small tank — say, 1,000 litres — really need anchoring?
Yes, though the method can be simpler. A 1,000-litre slimline tank empty weighs around 30–50 kg and has enough surface area to shift in strong wind, particularly on an exposed wall or corner site. At minimum, two wall brackets bolted into masonry are good practice. Ask your installer what they recommend for your specific location.
My tank came with strapping straps included. Is that enough?
Manufacturer-supplied strapping tells you the strap specification, not whether the anchor point it connects to is adequate. A strap tied to a fence post or looped around a drainpipe is not a proper anchor. The strap is only as good as what it is fastened to, so the anchor point — bolt, bracket, or ground anchor — needs to be assessed independently.
Can I anchor a tank to a wooden deck or timber structure?
It is possible, but the timber must be in good condition and the fixing bolts must pass through into solid framing, not just decking boards. An installer should check the timber's load-bearing capacity before committing to this approach. For larger tanks, a concrete plinth adjacent to the deck is usually more reliable.
How often should I check the anchoring straps?
Once a year is a reasonable minimum, and always after a severe storm. Check for abrasion where the strap contacts the tank, corrosion on metal fittings, and tension loss — straps can relax over time, especially in heat. If you see cracking in the strap material or surface rust on buckles, replace them before the next storm season.
Will my insurer cover damage caused by a tank blowing over?
This depends on your specific policy and whether the tank was installed and anchored correctly. Some insurers treat an unanchored tank as a maintenance failure, which may affect a claim. It is worth checking your household contents and structures policy wording, and keeping a record of your installation including any anchoring details provided by the installer.
Sources & notes
Pricing reflects typical Johannesburg market ranges and is confirmed by installer quotation. References: SABS
Ready to compare? Get up to 3 quotes from vetted backup water systems installers in Johannesburg — free, no obligation.
Get 3 free quotes